To configure a broadcast Live Profile from the Unit Panel or from the Web Interface, see the tabs below.
Unit Panel
From the Home menu, tap >> .
Tap the Profile Name field and enter a new profile name.
Tap to confirm the new profile name.
Tap the Application field and and choose between Bcast (SRT) or Bcast (SST).
Tap the End-to-End Latency field to adjust the latency.
Tap the Encoder Type field and choose between H.264/AVC and H.265/HEVC.
(SST Live Profiles only) Tap the Bitrate Control field and choose between VBR and CBR.
Tap the Capped Bitrate field to enter a new bitrate.
In the Audio settings, tap the Channel Layout field and choose between: 1x Mono, 1x Stereo, 2x Mono, 2x Stereo, 4x Mono, 4x Stereo, 8x Mono, and No audio.
Tap the Bitrate field to adjust bitrate.
Tap and select ADVANCED+.
Note
Advanced parameters are only available if the Encoder Type is H.264.
Tap the toggle button to enable I and P frames only.
Tap the toggle button to enable Manual Resolution.
If you enabled Manual Resolution, tap the Resolution field to display the resolution list, and select the resolution you want to apply.
Note
Only downscaling or same resolution are supported.
Tap to save the new Broadcast Live Profile settings.
Web Interface
In the sidebar, click Streaming > Live.
Click the Add Profile button. The Add Live Profile dialog appears.
Enter a profile name in the Profile Name field.
Fill in all parameters. For details on Broadcast Live Profile parameters, see Configuring Live Profiles.
Click the Add button.
JavaScript errors detected
Please note, these errors can depend on your browser setup.
If this problem persists, please contact our support.