Skip to main content

Configuring the Camera's REC Button

A Live or a Record can be started from the REC button of a camera. Configure this operation using either the Unit Panel or the Web Interface, as described in the tabs below.

Unit Panel
  1. From the Home menu, tap
    Settings icon
    >
    SDI icon
    .
  2. Tap the Triggered Operation field and select Live or Record.

    Note

    Record operation is not available in multi-encoding mode.

  3. Tap the Manufacturer field to choose a camera manufacturer.
Web Interface
  1. In the sidebar, click Streaming > Input/Output.
  2. In the Camera section's Trigger Operation field, select None, Live, or Record.

    Note

    Record operation is not available in multi-encoding mode.

    Camera Section

  3. If you selected Live or Record, select the camera manufacturer in the Camera Manufacturer dropdown.
  4. Click the Apply button.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.