Skip to main content

Using Bluetooth

External audio inputs can be added via Bluetooth to be used with the intercom. For more information, see Using the Intercom.

To configure Bluetooth from the Unit Panel or from the Web Interface, see the tabs below.

Unit panel
  1. From the Home menu, use the wheel to select
    Network icon
    > BT.
  2. Press the wheel to enable or disable Bluetooth.

After enabling Bluetooth is enabled, you can:

  • Select
    Scan icon
    to display all nearby devices. Then, select the device you wish to pair.
  • Select 
    List icon
    to display previously paired devices. Then, select the device you wish to pair.
Web Interface
  1. On the Dashboard in the Networks section, click on the toggle button in the Bluetooth line to enable or disable Bluetooth.
    Bluetooth enable
  2. After enabling Bluetooth, click the
    Settings icon
    icon to view nearby Bluetooth devices.
    Bluetooth pair
  3. Click the Pair button to pair with the desired Bluetooth device.

Note

To connect to a Bluetooth device previously paired or to forget it, click the

icon.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.