Skip to main content

Signing In to the Web Interface

To sign in to the Makito X1 configuration Web page:

  1. From your Web browser, type the encoder's IP Address into the address field and press Enter.
    (Optional) On some systems, you will see an Advisory and Consent Banner, as shown in the following example.
  2. Review the Advisory and Consent terms as required for your system and click OK.
  3. On the Sign-in page, type the Username and Password and click Sign In (or press Enter).


    Please refer to the Important Notice (postcard shipped with the appliance or available from the Download Center on the Haivision Support Portal) for the default sign-in credentials.

    Note

    The Makito X1 provides three pre-defined user accounts. For information, see Role-based Authorization

  4. After the first login, the Help Us Improve pop-up appears, as below.


    To help improve Haivision products by providing anonymous user analytics data, click Accept. To decline this feature, click Decline. 

    Info

    You can enable or disable this feature any time by going to Settings>Services



JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.