Skip to main content

Makito X1 Rugged Encoder Installation Guide

Hardware Update

The Makito X1 Rugged Encoder features an optional enhanced chassis (v2), with improved Network and DC IN & IO connectors, to meet the MIL-STD-810 requirements for high vibrations.

See DC IN & I/O Connector and Network Connector.

This Installation Guide provides the steps required to install and configure the Makito X1 Rugged Video Encoder to stream to your compatible decoding device. This guide covers the Makito X1 appliance (#S-MX1E-R-SDI1-ISR / #S-MX1E-R-V2-SDI1-ISR) and the Evaluation Kit (#S-MX1E-R-SDI1-DK / #S-MX1E-R-V2-SDI1-DK) available upon request at

Please refer to the Makito X1 Rugged Encoder User's Guide for detailed configuration and operation information, as well as technical specifications.

We recommend that you familiarize yourself with this guide before installing your encoder. 

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.