Skip to main content

Date and Time Settings

The following table lists the Date and Time settings: 

Date and Time Setting

Description/Values

Timezone

Time Zone

Select the desired time zone and corresponding city.

Note

The times are based on hours added to or subtracted from Greenwich Mean Time (GMT).

Current Time

(Read-only) The current local date and time.

Server

Use NTP

Toggle on to connect to a Network Time Protocol (NTP) server to synchronize the encoder or decoder clock.

NTP Server

If NTP is enabled, enter the IP address of the NTP server.

Manually Set Date & Time

If NTP is disabled, select the date and time from the calendar.

TestIf NTP is enabled, click to validate that the NTP server is reachable.
StatisticsIf NTP is enabled, click to display tracking and source information, and source statistics for the NTP server.
RebootIf changes have been made to the date and time settings, click to apply changes. 



JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.