Unit Front Panel

The unit front panel allows you to:

Configure the unit
Start/stop a live
Start/stop a record
Forward stored files
Edit various unit settings

Home Menu

The Home Menu provides easy access to each option:

Settings Menu
Configuring Network Interfaces
Start a Live
Start a Record
Forward Stored Files
Configuring Data Bridge

Settings Menu

The Settings Menu provides the following icons:

Story Configuration (Optional)
Input/Output Settings
Network Settings
Destination Profiles
Live Profiles
Record Profiles
Forward Settings
BGAN Settings
SD card Management
Device Settings
Device Information

Status bar

On the front panel the status bars on the top and bottom of the panel, icons indicate the unit state. For example:

Status Icon	What it means
	Battery levels.
	BGAN connection.
	Bars Pattern selected.
	Black Pattern selected.
	Circles Pattern selected.
	Cellular connections and their signal levels.
	Data bridge enabled/disabled. See Configuring a Data Bridge.
	Ethernet connection.
	HDMI input selected but no received stream.
	HDMI input selected receiving a stream.
	Intercom communication with master room. See Using the Intercom.
	Live at startup (if enabled). See Enabling/Disabling Auto-Live at Startup.
	Location (if enabled). See Enabling/Disabling the Unit Location.
	Stories selected if the unit is linked with a Manager supporting the Story Centric Workflow. See Selecting a Story.
	One or two USB keys and the memory space used.
	SD card detected and memory space used.
	SD card in Hot Folder mode. See Transmitting Files via the Hot Folder.
	SD card locked. Add, change or remove content on the card cannot be done if locked. Remove SD card and slide the Lock switch on the side of the card.
	SDI input selected but no received stream.
	SDI input selected receiving a stream.
	Unit connected to power supply.
	Video Return enabled and receiving a stream. See Receiving a Video Return.
	Wi-Fi connection configured in access point mode. See Configuring a Wi-Fi Access Point.
	Wi-Fi connection in client mode.