Audio Encoder Settings
The following tables list the Audio Encoder controls and settings:
Input Parameters
Audio Setting | Default | Description/Values |
---|---|---|
Input | SDI1 (1-2) | Select the Audio Input for the encoder.
|
Basic Parameters
Audio Setting | Default | Description/Values |
---|---|---|
Channel Mode | Stereo | Select the number and type of audio channels to encode:
|
Bitrate | 128 kbps | Select the Audio Bitrate for the encoder: Note As of v1.1.1, the Makito X1 allows lower audio encoding bitrates (intended for very limited bandwidth streaming situations), as well as higher quality audio encoding at higher bitrates. The allowed bitrate ranges for 16 kHz sample rate are different than what was previously available for 48 kHz. 48 KHz sample rate:
|
16 KHz sample rate (analog only):
| ||
Sample Rate (kHz) | 48 kHz | The number of audio samples per second taken from the incoming signal.
|
AAC-LC Algorithm | MPEG-2 ADTS | The audio compression algorithm:
|
0 dBFS Audio Level (dBu) | 0 dBu | (Analog Input only) Adjusts the maximum analog Audio Input signal level (0 dBfs) from -6 to 0 dBU. Note This is useful in applications such as broadcast and streaming to allow higher audio headroom. |
Language | n/a | To specify the language of the input, start typing letters and select the language from the list. |
Statistics | n/a | Click the Statistics icon |
Mute | n/a | Click the Mute/Unmute icon |
Stop Start | n/a | Click the Stop icon Click the Start icon |