ST 2110 Input Settings

Name

n/a

(Optional) A unique name for the media essence (up to 63 characters).

Media Type

Video

Select the media type for the media essence.

• Video, Audio, ANC Data

Auto-Start

Enabled

(Only available when creating a new essence) Check this checkbox to automatically start the media essence when created.

Address

n/a

The IP address of the media essence (in dotted-decimal format). This is typically a multicast address to which the ST 2110 data is being sent. 

Port

n/a

The UDP port of the media essence. Enter a number in the range 1025..65,535. 

RTP Payload

96 (video)
98 (audio)
100 (data)

The RTP Payload of the media essence. [0..127]

Source Address

Any

(Optional) The IP address of the media essence source for source-specific multicast.

Input

1

Select the input number for the media essence. This is used to assign the input to a video or audio encoder, or metadata source.

• 1, 2, 3, 4

Video Format

Automatic

(Media Type must be Video) Select the format for the video essence.

• Automatic

• Select a video resolution from the drop-down list

Number of Channels

2

(Media Type must be Audio) Enter the number of channels for the audio essence. 1 – 16

Packet Time

1ms

(Media Type must be Audio) Select the duration of packets for the audio essence, either:

• 1ms

• 125μs