Audio/Video Interface Specifications
Video Interfaces
| Quad HDI-BNC Inputs | Video Interfaces, Resolutions & Framerates | |
|---|---|---|
| SD-SDI | SMPTE 259M-C | 270 Mbps Interface, Note *HEVC only |
| HD-SDI | SMPTE 292M | 1,485 Gbps interface |
| SMPTE 274M | 1920x1080i (23.98/24/25/29.97/30 Hz) | |
| SMPTE 296M | 1280x720p (50/59.94/60 Hz) | |
| 3G-SDI | SMPTE 424M (Level A Only) | 3 Gbps interface |
| SMPTE 425M | 1920x1080p (50/59.94/60 Hz) | |
| 4x3G-SDI (UHD) | SMPTE 425-5 (2SI and SQD) | Up to 3840 x 2160p (50/59.94/60 Hz) |
| 6G-SDI | SMPTE 2081 (1 input only) | Up to 3840 x 2160p (24/25/29.97/30 Hz) |
| 12G-SDI | SMPTE 2082 (1 input only) | Up to 3840 x 2160p (50/59.94/60 Hz) |
| Impedance | ||
| SDI | 75 Ohms | |
| SMPTE ST 2110-20 | Uncompressed video transport. | |
Note
The following are not supported in ST 2110:
- 4 x 1080p59.94/60 ingest (as it is beyond the 10Gbps speed limit of the interface)
- 4Kp 59.94/60 ingest
- HDR metadata
Audio Interfaces
| Makito X4 Audio Interfaces (16-bit PCM Audio) | ||
|---|---|---|
Up to 64 channels of embedded audio per blade, in (stereo) 32 channel pairs. The channel pair sources are: Note When in mono mode, each audio encoder can only encode one left or right channel. | ||
Digital Embedded Audio | ||
| SD-SDI | SMPTE-272M | Formatting AES/EBU Audio and Auxiliary Data into Digital Video Ancillary Data Space |
| HD/3G-SDI | SMPTE 299M | Formatting 24-Bit Digital Audio Format for SMPTE Bit-Serial Interfaces |
| SMPTE ST 2110 Audio Interfaces (IP over SFP+ Input) | ||
| SMPTE ST 2110-30 | Audio transport, based on AES67. AES67 uses IEEE 1588-2008 Precision Time Protocol (PTPv2) for clock synchronization. PTP provides global microsecond accuracy timing of all essences. Synchronization is based on SMPTE 2059. | |
| SMPTE ST 2110-10 PTP | System architecture and synchronization: Individual audio, video and ancillary data tracks or clips are carried as separate individual streams, referred to as "essences". | |