Adding a Destination Profile

To add a destination Profile from the Unit Panel, or from the Web Interface, see the sections below. 

Unit Panel

1. From the Home menu, tap  >  > .

2. Tap 

   

   to configure the new destination profile settings (see Destination Profile Settings for details on each destination type).

3. Tap  to save the new destination profile settings.

Web Interface

1. Click on Settings > Destination.

2. Click the  button. 

3. Enter a Name for the Profile.

4. Select the type of Destination Profile (StreamHub, Manager, or SRT Receiver).

5. Configure the settings as shown in the table below in Destination Profile Settings.

6. Click on Apply.

To select the newly created Destination Profile, seeSelecting a Destination Profile.

Destination Profile Settings

Note

• These settings may have been changed by the system administrator.

• Auto-connect option is selected to connect automatically to a receiver when the unit is powered. This connection cannot be established through a BGAN terminal.

StreamHub	Manager	SRT Receiver
StreamHub IP address or Hostname Input assignment on the StreamHub (Automatic Assignment possible) Auto-connect function (Enabling/Disabling) Note This connection cannot be established through a BGAN terminal. Port used. Default: 7900 Username. Default: aviwest Password. Default: safestreams AES key if required	Manager IP address or Hostname Auto-connect function (Enabling/Disabling) Note This connection cannot be established through a BGAN terminal. Port used. Default: 9000 Username. Default: username Password (if required). Default: password	SRT mode (Caller or Listener) Host SRT port Ethernet port Latency SRT Encryption (and passphrase if enabled) Stream ID (in Caller mode only)