Adding a Destination Profile

To add a destination Profile from the Unit Panel, or from the Web Interface, see the sections below. 

Unit Panel

1. From the Home menu, use the wheel to select

   

   >

   

   .
2. Press the wheel to create a new destination profile.
3. Press the wheel to enter the Profile Name field and use the wheel to select characters and compose a name.
4. Select the

   

   key and press the wheel to confirm the destination profile name.
5. Use the wheel to select the type of destination.
6. Use the wheel to configure the destination profile settings (see Destination Profile Settings for details on each destination type).
7. Turn the wheel to select

   

   and press it to confirm.

Web Interface

1. Click on Settings > Destination.
2. Click the

   

   button. 
3. Enter a Name for the Profile.

4. Select the type of Destination Profile (StreamHub, Manager, or SRT Receiver).

5. Configure the settings as shown in the table below in Destination Profile Settings.

6. Click on Apply.

To select the newly created Destination Profile, see Selecting a Destination Profile.

Destination Profile Settings

Note

• These settings may have been changed by the system administrator.
• Auto-connect option is selected to connect automatically to a receiver when the unit is powered. This connection cannot be established through a BGAN terminal.