The following table lists the Status settings. Status information can be useful for troubleshooting and may be forwarded to Haivision Technical Support if you are requesting technical support.
|
Setting |
Description |
|---|---|
|
Card Status |
OK (or error message if applicable). |
|
Card Type |
The type of device, e.g., Makito2 Dual-SDI Encoder or Makito2 Decoder. |
|
Part Number |
The Haivision part number for the encoder or decoder, e.g., B-292E-HDSDI2 |
|
Serial Number |
The serial number for this appliance or card. |
|
Firmware Version |
The firmware version of the device, e.g., v2.2-47 |
|
Firmware Date |
The firmware release date. |
|
Firmware Options |
(If applicable) Firmware options installed, e.g., KLV-COT (Metadata Capture KLV & COT) or SRT. |
|
Hardware Version |
The hardware version of the device. |
|
Hardware Compatibility |
-001G (basic card assembly). |
|
Mezzanine |
(applicable hardware only) Indicates whether the mezzanine board is present. |
|
Mezzanine Type |
(applicable hardware only) The type of mezzanine board, e.g., HEVC Encoder. |
|
CPLD Version |
The CPLD version of the device. |
|
Boot Version |
The Boot version of the device. |
|
System Uptime |
The length of time the encoder or decoder has been "up" and running (e.g., 1 day 03:42:03). |
|
Encoding Chipset Load |
(Encoder only) The combined video encoding processor usage in percentage% (combining both Hi and Lo streams). |
|
Temperature |
The current board temperature in degrees Celsius. |