Services Settings
The configurable Services are as follows:
Service | Description |
|---|---|
HTTP | Hypertext Transfer Protocol, used for Web browsers acting as a client. Note Only secured HTTP (HTTPS) is supported. See Managing Certificates to manage HTTP TLS certificates. |
SSH | Secure Shell, a network protocol that allows data to be exchanged using a secure channel between two networked devices. |
Telnet | Telnet, a network protocol used on the Internet or local area networks to provide bidirectional communications via a virtual terminal connection. |
SNMP | Simple Network Management Protocol, a network protocol used mostly in network management systems to monitor network attached devices. |
Haivision EMS | EMS (Element Management System) allows simple management of Haivision-only devices such as Haivision EMS and Haivision Hub 360. For more on pairing to EMS, see Pairing the Encoder with Haivision EMS . |
Service | Description |
|---|---|
VF | Protocol used for communication between the encoder and Furnace servers. Note that VF Pilot provides access to encoder configuration settings. |
Talkback | Audio Talkback (a Makito X feature) allows end users monitoring a streaming session to "talk back" to individuals at the video source, via a speaker or headphones connected to the encoder. For details, see Audio Talkback. |
Serial Pass- | Bi-directional serial pass-through for controlling serially attached devices such as PTZ controlled cameras. Both RS-232 and RS422 are supported. Note The COM Port Mode must first be set to Pass-Through (see Managing the COM Port). |
Port | (Serial Pass-Through must be enabled) Specifies the TCP port that the Makito X will listen on for remote commands. |
RTSP | Enables streaming of video feeds from the Makito X encoder to a Milestone server for archiving and analysis using the RTSP protocol. |
ONVIF | Enables the ONVIF management API to send commands from the Milestone XProtect video management software (VMS) to the Makito X encoder. |