An adapter is required to interface with the serial port. A (gray) DB9 to RJ45 Serial Management adapter (shown in Connecting the Encoder to the Network and a Computer) is included in the package.
The Serial Management adapter has the following pinouts:
|
Management Port (RJ-45 Jack) |
Serial Port (DSub-9 Female Connector) |
||
|---|---|---|---|
|
Pin # |
Signal |
Pin # |
Signal |
|
1 |
RI (Ring Indicator) |
9 |
RI (Ring Indicator) N/C |
|
2 |
DCD (Data Carrier Detect) |
4 |
DTR (Data Terminal Ready) |
|
3 |
DTR (Data Terminal Ready) |
6 |
DSR (Data Set Ready) |
|
4 |
GND (Ground) |
5 |
GND (Ground) |
|
5 |
RXD (Receive Data) |
3 |
TXD (Transmit Data) |
|
6 |
TXD (Transmit Data) |
2 |
RXD (Receive Data) |
|
7 |
CTS (Clear to Send) |
7 |
RTS (Request to Send) |
|
8 |
RTS (Request to Send) |
8 |
CTS (Clear to Send) |
|
|
|
1 |
DCD (Data Carrier Detect) |
