Makito X Encoder
Makito X Encoder
Breadcrumbs

Logo Settings

The following table lists the Logo controls and settings:

Setting

Default

Description

Input

n/a

On the Makito X SDI dual channel, the video input is either BNC-1 or BNC-2.
On the Makito X-DVI or SDI single channel, there is only one video input.

Position

Bottom Right

Select the position for the logo overlay:

  • Bottom Right

  • Top Right

  • Bottom Left

  • Top Left

  • Centered

  • Absolute

Note

In Absolute mode, the logo will be positioned at the exact X and Y coordinates specified.

  • Relative

Note

Relative mode uses the X and Y coordinates specified, while keeping the logo in proportion to the display area, regardless of the input resolution. The original scaling is vis-à-vis a 1920x1080 grid.

Coordinates

0, 0

Specifies the position of the logo on the X and Y axes. (The origin is the top left corner of the display area.)

Note

Only takes effect if Position is set to Absolute.

Transparency

0

Specifies the percentage of transparency for the logo:

  • 0 = no transparency (i.e., a completely solid/opaque logo)

  • 100 = fully transparent (i.e., a completely transparent/invisible logo)

Scaling

100

Specifies the scale factor (percentage) for the logo:

  • 25% = 1/4 size

  • 100% = no scaling

  • 400% = 4x

Display

Disabled

Check this checkbox to display the selected file as a logo overlay.