Skip to main content

Physical Characteristics

The table below describes some basic characteristics of the Makito XCR. For complete specifications, please refer to the data sheet available from the Haivision Web site.

Makito XCR Video Encoder (#S-292E-XCR)

51mm H x 127mm W x 185mm D

(2.0” H x 5.0” W x 7.3” D)

MaterialAluminum 6061 T651 per SAE AMS-QQ-A-250/11
Weight2.65 Ibs. / 1.25 kg
FinishExternal: Black anodized, as per MIL-A-8625F, Type 2, Class 2

Operating: -40° to 71°C (-40º to 160ºF)
Non-operating: -45º to 85ºC (-49º to 185ºF)

Relative Humidity0-100% condensing
IP RatingIP67, dust tight with water immersion up to 1 meter depth for 30 minutes.


If you have questions regarding the suitability of the Makito XCR in your operating environment, please contact Haivision Technical Support.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.