Skip to main content

Getting Started with the Web Interface


Before proceeding, make sure that the decoder is set up correctly and all necessary network and A/V connections are established. See Installing the Decoder.

All Makito X decoder interfaces and applications such as Audio/Video services and IP links may be configured, managed, and monitored through the Web Interface, the Command Line Interface (CLI), or an SNMP server. All methods require access to the decoder through its Ethernet LAN port.


Most Audio/Video settings are defined at the encoder end, and the decoder adjusts to the settings embedded in the received stream.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.