hdmi

The hdmi command is used to manage decoder HDMI settings.

Note

The HDMI port can be configured to mirror the same content that is seen on either Decoder 1 or Decoder 2. If the stream contains computer graphics content, that content can only be displayed on the HDMI interface. By default, HDMI displays the SDI 1 content, so you only need to change the HDMI setting to monitor the SDI 2 channel.

Synopsis

hdmi set parameter=value [parameter=value ...]
hdmi get

Actions

Action

Description

set

Configures HDMI settings.

A series of one or more parameter=value pairs can be specified at once. See Parameters below.

get

Displays HDMI status information.

Parameters

Parameter	Default	Description/Values
videoSource	Decoder1	None, Decoder1, Decoder2.
audioSource	Chan12	Chan12, Chan34, Chan56, Chan78
surroundSound	no	yes, no

Example

# hdmi get

Displays the current HDMI configuration and status.

Decoder Hdmi Information:
  Video Source       : Decoder1
  Audio Source       : Chan1+2
  Surround Sound     : No
  Decoder 1 State    : Running
  Current Resolution : 1280x720 Progressive
  Current FrameRate  : 60

Related Topics

Configuring the HDMI Display