The following table lists the system settings. System information can be useful for troubleshooting and may be forwarded to Haivision Technical Support if you are requesting technical support.
|
System Setting |
Description/Values |
|---|---|
|
Device Name |
The name of your Makito X4 device, which is displayed in the browser tab. To change the device name, type in a new name and click Apply. |
|
Personality |
Select between SDI, SQD, DEFENSE and SMPTE 2110. This setting will take effect upon the next reboot. |
|
Card Status |
OK (or error message if applicable). |
|
Card Type |
The type of device, e.g., Makito X4 SDI Encoder. |
|
Part Number |
The Haivision part number for the encoder or decoder, e.g., B-MX4E-SDI4 or S-MX4D-SDI. |
|
Serial Number |
The serial number for this appliance or card. |
|
Firmware Version |
The firmware version of the device, e.g., 1.0.0-23. |
|
Firmware Date |
The firmware release date. |
|
Hardware Version |
The hardware version of the device. |
|
Hardware Compatibility |
-001G or -002G (basic card assembly). |
|
Carrier Type |
(Makito X4 Rugged Encoder only) The interface carrier board. Note In Release 1.2, the number of CVBS inputs supported depends on the Carrier Type. "Makito 4KR" indicates the three-input variant, whereas "Makito 4KR 12G" indicates the four-input variant. |
|
CPLD Version |
The CPLD version of the device. |
|
System Uptime |
The length of time the encoder or decoder has been "up" and running (e.g., 4 days 17:42:03). |
|
Encoding Chipset Load |
(Encoder only) The combined video encoding processor usage in percentage% (combining both Hi and Lo streams). |
|
Temperature |
The current board temperature in degrees Celsius. |
Related Topics