Makito X4 Encoder
Makito X4 Encoder
Breadcrumbs

COM Port Settings

The following table lists the COM Port settings.

Note

With the exception of the COM Port Mode, the COM Port settings are read-only. For information on modifying the COM Port settings, see "Metadata Settings" (link below).

Setting

Default

Description

Mode

Management

Selects the type of activity:

  • Management

  • Metadata (required in order to configure the Metadata settings)

  • Pass-Through (required to control serially attached devices such as PTZ controlled cameras).

Note

You must reboot the encoder when you change the Mode.

Standard

RS-232

(Read-only) The serial mode standard:

  • RS-232 or

  • RS-422

Baud Rate

115200

(Read-only) The COM Port bitrate.

Data Bits

8

(Read-only) The COM Port databits: 8

Parity

None

(Read-only) The COM Port parity: None

Stop Bits

1

(Read-only) The COM Port stopbits: 1

Flow Control

None

(Read-only) The COM Port flow control: None


Related Topics