Services Settings

The configurable Services are as follows:

Network Services

Service	Description/Values
HTTP	Hypertext Transfer Protocol, used for Web browsers acting as a client. Note Only secured HTTP (HTTPS) is supported.
SSH	Secure Shell, a network protocol that allows data to be exchanged using a secure channel between two networked devices.
Telnet	Telnet, a network protocol used on the Internet or local area networks to provide bidirectional communications via a virtual terminal connection.
SNMP	Simple Network Management Protocol, a network protocol used mostly in network management systems to monitor network attached devices.
EMS	EMS (Element Management System) allows simple management of Haivision-only devices. Possible connection statuses for the EMS service are:
NMOS	Enable NMOS to apply NMOS IS-04, IS-05 and IS-09 specifications using mDNS based Discovery Mode. Select either Automatic or Manual for the Discovery Mode, and configure the necessary parameters. For configuration details, see Configuring NMOS. Note This service is only available in the ST 2110 personality. Personalities can be changed from the System page.
Product Analytics	Toggle Enable Anonymous Product Analytics on or off to enable or disable the collection of anonymous product analytics.
Thumbnail Preview	Preview Thumbnails provide a visual reference of each video encoder’s input. By default, previews are enabled and set to 10 second intervals.

Encoder-only

Service	Description/Values
Serial Pass-Through	(Makito X Series Rugged Encoders only) Bi-directional serial pass-through for controlling serially attached devices such as PTZ controlled cameras. Both RS-232 and RS422 are supported. Note The COM Port Mode must first be set to Pass-Through.
Port	(Serial Pass-Through must be enabled) Specifies the TCP port that the Makito X will listen on for remote commands.
RTSP	Enables streaming of video feeds from the Makito X encoder to a Milestone server for archiving and analysis using the RTSP protocol.
ONVIF	Enables the ONVIF management API to send commands from the Milestone XProtect video management software (VMS) to the Makito X encoder .

Related Topics