Makito X4 Encoder
Makito X4 Encoder
Breadcrumbs

Signing In to the Web Interface

To sign in to the Makito X4 configuration Web page:

  1. From your Web browser, type the Makito X4's IP Address into the address field and press Enter.
    (Optional) On some systems, you will see an Advisory and Consent Banner, as shown in the following example. 

    MX4E_Banner Argon.png

  2. Review the Advisory and Consent terms as required for your system and click OK.

  3. On the Sign-in page, type the Username and Password and click Sign In (or press Enter).

    MX4E_Sign In Argon.png

    Please refer to the Important Notice (postcard shipped with the appliance or available from the Download Center on the Haivision Support Portal) for the default sign-in credentials.

Note

Makito X4 provides three pre-defined user accounts. For information, see Role-based Authorization. 

  1. After the first login, the Help Us Improve pop-up appears, as below.

    AR_Data collection option.png

    To help improve Haivision products by providing anonymous user analytic data, click Accept. To decline this feature, click Decline.

Tip

You can enable or disable this feature any time by going to Settings>Services.