The table below describes some basic characteristics of the Makito X4 Rugged Encoder. For complete specifications, please refer to the data sheet available from the Haivision Web site.
|
Makito X4 Rugged Encoder (#S-MX4E-R-SDI4-ISR) |
|
|---|---|
|
Dimensions |
66mm H x 146.2mm W x 185.7mm D
|
|
Weight |
1.93 kg (4.25 1bs.) |
|
Material |
Aluminum 6061 T651 per SAE AMS-QQ-A-250/11 |
|
Finish |
External: Black anodized, as per MIL-A-8625F, Type 2, Class 2 |
|
Power |
28 VDC Nominal, 25W |
|
Temperature |
Operating: -40°C to 71°C (-40°F to 160°F)
|
|
Relative Humidity |
0-100% condensing |
|
IP rating |
IP67
Caution The IP67 rating only applies when the connectors are mated. Otherwise, the usage of dust cap connectors (provided by Haivision, shown in the following figures) is required.
|
Caution
If you have questions regarding the suitability of the Makito X4 Rugged encoder in your operating environment, please contact Haivision Technical Support.