The LED colors and flashing (blinking) speed indicate the status (operational state) of the Makito FX encoder.
LED Status Indicators
The following sections list the status LED behaviour for the Makito FX encoder
General
|
Function |
Description |
Indication |
|---|---|---|
|
BOOTING/INITIALIZATION SEQUENCE
|
1. Green solid |
Upon connection to a power source, booting/initialization sequence has begun (10 seconds). |
|
2. Green slow blinking |
Booting/initialization sequence in progress. |
|
|
3. Green solid |
Booting/initialization sequence complete (No fault/Normal Operation). |
|
|
STATUS |
Off |
No power. |
|
Green fast blinking |
Reset button is pressed for less than four seconds. If the Reset button is not pressed, there is a power fault. |
|
|
Red fast blinking |
Reset button is pressed for more than four seconds (Factory Reset enabled). |
|
|
Red slow blinking |
Reset button is released after the Red fast blinking state (executing Factory Reset). |
Network Port
|
Function |
Description |
Indication |
|---|---|---|
|
LINK
|
Off |
Not connected |
|
Green blinking once per second |
Connected at 10 Mbps |
|
|
Green blinking twice per second |
Connected at 100 Mbps |
|
|
Green blinking three times per second |
Connected at 1000 Mbps |
|
|
ACT
|
Off |
No activity |
|
Green intermittent |
Little activity (e.g., management). The LED should be lit when there is activity. |
|
|
Green solid |
Intense activity (e.g., transmitting video traffic) |