Makito FX Encoder
Makito FX Encoder
Breadcrumbs

CoT Relaying

From the Metadata Detail View, you can configure retransmission of CoT metadata received over the UDP interface. The metadata will be retransmitted as a CoT/UDP unicast or multicast stream so that multiple CoT listeners can access the source CoT data. You can retransmit up to eight (8) CoT/UDP messages. 

To configure CoT Retransmission:

  1. From the Metadata List View, click the Settings icon AR_settings.png on the CoT metadata source to be retransmitted. For details on setting up the metadata source, see (1.0) Setting Up Streams.

  2. On the Metadata Detail View, if necessary, scroll down the page and toggle the CoT Relaying button on.

    MFX_Metadata CoT Relay on.png

  3. To add a CoT retransmission destination, click Add.

  4. On the Add CoT Relay dialog, enter the IP Address and Port for the destination.
    Adjust the TTL and TOS values if required.

    MFX_metadata add CoT relay.png

  5. Click Add.
    The stream is added to the list.

    MFX_ CoT Relay list.png

  6. To edit a CoT relay destination, click the vertical ellipsis menu on the relay stream and select Edit.

    MFX_CoT Relay edit__delete.png

  7. The Edit CoT Relay panel opens. From here, edit the available fields as necessary. 

    MFX_Edit CoT Relay.png

  8. To delete a CoT relay destination, check the check-box on the relay stream panel and click Delete, or select Delete from the vertical ellipsis menu.   

Related Topics