Skip to main content

Configuring Inputs

You must first define one or more Inputs before you can define a Stream. Inputs can either be a source URL, an SRT source, or other input (such as an SDI or Analog Composite encoding source): 

  • For transcoding, each Input consists of a valid source URL with an optional name and notes. In addition, with TS over UDP, you can select the network interface to input streams from any of the available Network Interface Cards (NICs).
  • The default stream type for the Input is MPEG TS over UDP. You may also select TS over SRT, RTSP, Raw Motion JPEG (MJPEG), or RTMP.


    Bypass mode may be used to transmux RTSP input to TS/UDP or TS/SRT output.

    As of Release 3.3, Kraken supports RTMP input and output in Bypass mode.

  • To configure encoding/processing of baseband video or uncompressed video over IP, you may select an SDI, Analog Composite, ST2110 (SFP SDI to IP gateway), GigE Vision, or Network Device Interface (NDI) input. 

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.