Starting a Live

1. Use the wheel to select

   

   and press to confirm.
   Turn the wheel to configure the live:
   
   

   

   Selected live profile
   

   

   Selected record profile
   

   

   Auto-record (on/off)
   

   

   Selected destination profile
   
   
2. Use the wheel to select

   

   and press to start the live.
3. Turn the wheel to display more information.

Tip

Some information is displayed:

Network bitrate

End-to-end latency

Source standard

Live duration

When Auto-record is ON, additional information appears:

Remaining recording time possible on SD card

Space used on SD card

Connection Loss during a Live with Simultaneous Record

Recordings of your Live events will continue even if the network connection is lost and Live is interrupted.

If the network connection is lost:

1. You will receive an error message.
   

   

   
   
2. Press the wheel to select OK and return to the Live preview, where you will see the recording still in progress. 
   

   

   
   

3. Turn the wheel to the left to view the resolution and remaining recording time possible on the SD card.
   

   

   

   Note

   The Forward

   

   function is disabled when network connection is lost.