nas

The nas command is used to manage Network Assisted Storage settings. This is useful to set an NFS mount point on the Makito X for storing snapshots or (with the Makito X with Storage) for copying recordings after they are completed.

Synopsis

nas enable location=remotehost:remotedir
nas get
nas disable

Actions

Action	Description
enable	Configures and enables NAS. A series of one or more `parameter=value` pairs can be specified as once. See Parameters below.
get	Displays NAS configuration and status information.
disable	Disables NAS.

Parameters

Parameter	Default	Description/Values
`location`	n/a	Specifies remote host IP address and path, using the format: `remotehost:remotedir`

Example

# nas enable location=indigo:/home/flemieux/shared

Activates Network Assisted Storage and specifies the remote host IP address and path.

# nas get

Returns NAS configuration information for the encoder, such as:

Configuration:
  Status            : Enabled
  Remote Host       : "tserver.haivision.com"
  Remote Dir        : "/NFS"

# nas get all

Returns NAS configuration information and statistics for the encoder, such as:

Configuration:
  Status           : Enabled
  Remote Host      : "tserver.haivision.com"
  Remote Dir       : "/NFS"
Statistics:
  Capacity         : 49.08GB
  Used             : 79.96MB (0%)
  Available        : 40.94GB (83%)

Related Topics

Managing Network Storage