Skip to main content

Status Settings

The following table lists the Status settings. Status information can be useful for troubleshooting and may be forwarded to Haivision Technical Support if you are requesting technical support.

Status Setting


Card Status

OK (or error message if applicable).

Card Type

The type of device, e.g., Makito2 Dual-SDI Encoder or Makito2 Decoder.

Part Number

The Haivision part number for the encoder or decoder, e.g., B-292E-HDSDI2

Serial Number

The serial number for this appliance or card.

Firmware Version

The firmware version of the device, e.g., v2.2-47

Firmware Date

The firmware release date.

Firmware Options

(If applicable) Firmware options installed, e.g., KLV-COT (Metadata Capture KLV & COT) or SRT.

Hardware Version

The hardware version of the device.

Hardware Compatibility

-001G (basic card assembly).

Mezzanine(applicable hardware only) Indicates whether the mezzanine board is present.
Mezzanine Type(applicable hardware only) The type of mezzanine board, e.g., HEVC Encoder.

CPLD Version

The CPLD version of the device.

Boot Version

The Boot version of the device.

System Uptime

The length of time the encoder or decoder has been "up" and running (e.g., 1 day 03:42:03).

Encoding Chipset Load

(Encoder only) The combined video encoding processor usage in percentage% (combining both Hi and Lo streams).

TemperatureThe current board temperature in degrees Celsius.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.