personality
The personality command allows a Makito X Decoder 2.4 which is licensed as dual channel (S/B-292D-HD2-*) to change configuration to support single channel (S/B-292D-HD1-*) decoding only. This allows dual channel Makito X devices to access single channel features such as the ability to decode eight (8) audio pairs (16 audio embedded channels) and the ability to mirror the decoded stream on all output interfaces (SDI2 mirrors the SDI port). Makito X Decoders which are licensed as dual channel can switch their personality back and forth between single and dual channel configurations as desired. The change takes effect once the unit is rebooted.
Note
This command may only be used by an administrator.
Makito X decoder personalities do not change due to a factory reset. Factory reset restores the unit's personality to the default value (determined by licensing).
This feature is only available on units that have a dual-decoding license. Without a dual-decoding license, you will get:1
2
admin@MXD-142-91:~$ personality set dual
Single channel license. Personality setting is disabled.
Synopsis
personality set <TYPE> |
Actions
| Action | Description |
|---|---|
| set | Sets the decoder personality that will take effect on the next reboot. |
| get | Displays the current decoder personality. |
Parameters
| Parameter | Default | Description/Values |
|---|---|---|
| n/a | Sets the personality that will take effect on the next reboot, either SINGLE or DUAL. |
Examples
# personality get |
# personality set single |