Skip to main content

View Your Streams

To view your streams, make sure your decoding devices or applications: 

  • support MPEG Transport Stream format,
  • are turned on and connected to a display (if applicable), or open your video player software (e.g., VLC),
  • are accessible on the same network segment as the Makito X4, and
  • are “tuned” to the Makito X4 Destination IP address and Port, for example, / ports 2000 and 2400 (as defined in Set Up Streaming).


For the recommended settings to optimize the Makito X4 encoder configuration to stream to the Makito X decoder, see Makito Decoder Interoperability (in the User's Guide).


In order to optimize your encoder’s performance, it is recommended that only the required network services be enabled. Please review the network services to make sure services used for your application are enabled or disabled as appropriate. See Enabling and Disabling Network Services (in the User's Guide).


Clicking Apply does not save your changes and they will be lost after a reboot. Saving configurations as presets provides a way for you to save groups of settings and apply them to other streams. A warning indication

Unsaved Configuration Warning
appears in the title bar on systems with unsaved configurations. Starting with v1.4, a Preset Auto-Save setting is available. For more information, see Saving and Loading Presets (in the User’s Guide).

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.