Skip to main content

Getting Started with the Web Interface

Important

Before proceeding, make sure that the encoder is set up correctly and all necessary network and A/V connections are established.
To install and connect the Makito X4 appliance, please refer to the Makito X4 Encoder Quick Start Guide.
To install and connect the Makito X4 Rugged Encoder, refer to the Makito X4 Rugged Encoder Installation Guide.

All Makito X4 interfaces and applications such as Audio/Video services and IP links may be configured, managed, and monitored through the Web interface, the Command Line Interface (CLI), or an SNMP server. All methods require access to the Makito X4 through its Ethernet LAN port. 

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.