logo

The logo command is used to manage logo overlays. You can configure the Makito X1 to display one graphic file as a logo overlay in the encoded video.

You can configure the size, transparency, and position of the logo. These settings will be saved in the current preset configuration. For more on presets, see Saving and Loading Presets.

The graphic file can be uploaded in, JPEG, PNG, BMP, or GIF format.

Synopsis

logo enable
logo disable
logo set [parameter=value...]
logo get
logo list
logo delete name
logo delete all
logo rename [oldname newname]

Actions

Action	Description
enable	Displays the logo when configured properly.
disable	Hides the logo.
set	Configures logo settings. A series of one or more `parameter=value` pairs can be specified at once. See Parameters below.
get	Displays information on the logo.
list	Lists the available logo files. Logos are stored on the Makito X file system in the folder `/usr/share/haivision/logos`.
delete name	Deletes a logo file from the list.
delete all	Deletes all logo files from the list.
rename	Renames a logo file.

Parameters

Parameter	Default	Description/Values
`filename`	n/a	The name of the `.oly` file to use as a logo overlay, or 'none'. Note The file must be in Haivision’s overlay image (`.oly`) format.
`display`	Off	Enables the display of the specified file as a logo overlay. `On,Off`
`opacity`	100	Specifies the opacity percentage of the logo. 0 — an invisible logo ... 100 — a solid logo
`scaling`	100	Specifies the scale factor (percentage) for the logo: 25 — logo is 1/4 its original size 100 — no scaling 400 — logo is 4 times its original size
`relative`	Off	If enabled, keeps the logo in proportion to the display area regardless of the input resolution. If enabled, will appear in parentheses next to the scaling factor, e.g. `Scaling : 100% (relative)` Note The original scaling is vis-à-vis a 1920x1080 grid.
`positioning`	BottomRight	Specifies the position for the logo: BottomRight TopRight BottomLeft TopLeft Centered Absolute: Uses the exact X and Y coordinates. Relative: Uses the X, Y coordinates in relation to a 1920x1080 display area.
`x`	0	Horizontal coordinate used to position the top left point of origin in Absolute or Relative positioning modes. When using Absolute positioning, this is the exact horizontal position of the logo's top left point of origin.
`y`	0	Vertical coordinate used to position the top left point of origin in Absolute or Relative positioning modes. When using Absolute positioning, this is the exact vertical position of the logo's top left point of origin.

Example

# logo set filename=HaivisionLogoTransparent.oly opacity=65 positioning=bottomright display=on

Configures the file HaivisionLogoTransparent.oly to display as a logo on the system.

Related Topics: