Skip to main content

Getting Started with the Web Interface


Before proceeding, make sure that the encoder is set up correctly and all necessary network and A/V connections are established. For information on connecting the appliance, refer to the Makito X1 Rugged Encoder Installation Guide.

Also, please familiarize yourself with the Safety Guidelines and Waste Electrical and Electronic Equipment (WEEE) Disposal notice.

All Makito X1 interfaces and applications such as Audio/Video services and IP links may be configured, managed, and monitored through the Web interface, the Command Line Interface (CLI), or an SNMP server. All methods require access to the Makito X1 through its Ethernet LAN port. 

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.