View Your Streams

To view your streams, make sure your decoding devices or applications: 

• support MPEG Transport Stream format,
• are turned on and connected to a display (if applicable), or open your video player software (e.g., VLC),
• are accessible on the same network segment as the Makito FX, and
• are “tuned” to the MFX Destination IP address and Port, for example, 225.6.7.8 / ports 2000 and 2400 (as defined in Set Up Streaming). 
  
  

Tip

For the recommended settings to optimize the Makito FX encoder configuration to stream to the Makito X decoder, see Makito Decoder Interoperability (in the User's Guide).

Note

In order to optimize your encoder’s performance, it is recommended that only the required network services be enabled. Please review the network services to make sure services used for your application are enabled or disabled as appropriate. See Enabling and Disabling Network Services (in the User's Guide).