Network Settings
The following tables list the Kraken Network settings.
General
Network Setting | Description/Values |
---|---|
Hostname | The hostname to be assigned to the Kraken. This is a FQDN (Fully Qualified Domain Name), for example, myserver.mycompany.com. |
IPv4 | When set to On, configures the network to use IPv4 addressing. See the 'IPv4' tab. |
IPv6 | When set to On, configures the network to use IPv6 addressing. See the 'IPv6' tab. |
Default Interface |
The default Ethernet interface: Select an available interface from the drop-down list. Note Network Interface names for Ethernet interfaces vary, such as eth0/eth1/… or eno1/eno2/…. "None" or Blank indicates that the default interface is not set. |
Primary DNS | (Optional) Enter the primary DNS server address for your network. |
Secondary DNS | (Optional) Enter an alternate DNS server address for your network. The alternate DNS server is used only if the primary server is not responding. |
DNS Precedence | Select either IPv4 or IPv6 to specify the priority for DNS resolution. |
Search Domains | (Optional) The search strings to use when attempting to resolve domain names. |
NTP Server | If the Network Time Protocol (NTP) is enabled, enter the IP address of the NTP server. |
IP Forwarding | Check this checkbox to enable IP forwarding when setting up streams using non-primary interfaces for their input. |
SNMP |
To enable SNMP (Simple Network Management Protocol) alerts for out-of-band monitoring, toggle this button to On. |
Read-Only Community | (SNMP must be enabled) Type in the SNMP community string associated with the SNMP Trap Server. This is the string to use when sending a trap to an SMTP Trap server. For example: "Kraken" |
SNMP Trap Servers |
(SNMP must be enabled) The SNMP server to send SNMP Traps to. This is an IPv4 or FQDN of an SMTP Trap server listening for traps via SNMP. For example: SNMP1.mycompany.com |
Interfaces
Network Setting | Description/Values |
---|---|
User Description | (Optional) Enter a customized name for the network interfaces. This description appears beside the interface names on the Default Interface drop-down list (see above), as well as the Network Interface drop-down lists on the Input and Output creation pages. |
eth0 | eth1 | eth2 | ... |
Allows for multiple interfaces. Select the appropriate tab to view and configure. Note Depending upon your device, the network interface prefixes may differ. |
IPv4
Network Setting | Description/Values |
---|---|
Addressing |
Select DHCP or Static to enable or disable the Dynamic Host Configuration Protocol (i.e. to use a static or dynamic IP address). Options are:
|
IP Address |
Displays the IP Address for the Kraken appliance. This is a unique address that identifies the unit in the IP network. If DHCP is disabled, you may enter an IP address in dotted-decimal format. |
Subnet Mask |
This is a 32-bit subnet mask used to divide an IP address into subnets and specify the network's available hosts. If DHCP is disabled, you may enter the Network Mask in dotted-decimal format (e.g., 255.255.0.0). |
Gateway |
Displays the gateway address of the network (typically the address of the network router).This is the gateway that is used when no other route matches. This address must be reachable on your local subnet. If DHCP is disabled, you may enter a gateway address in dotted-decimal format. |
MTU | (Maximum Transmission Unit) Specifies the maximum allowed size of IP packets for the outgoing data stream. |
MAC Address | (Read-only) The Media Access Control address assigned to the interface. This is the physical address of the network interface and cannot be changed. |
Link |
Determines whether the Ethernet parameters are set automatically or manually (i.e., enables or disables autonegotiation):
Note Always use Auto with Gigabit Ethernet (GigE) speed (1000 Mbps). |
IPv6
Network Setting | Description/Values |
---|---|
Addressing |
Select one of the following options to obtain an IPv6 address for the unit:
|
Global IPv6 Address |
If Automatic addressing is used, displays the IPv6 address (with a If Static addressing is used, enter an IPv6 address in hexadecimal notation. |
Global Temporary IPv6 Address |
If privacy extensions (SLAAC) are being used with Automatic addressing, this field displays the temporary IPv6 address. The temporary address will change in accordance with network changes. |
SLAAC Management Address |
If Automatic addressing is used, displays the address assigned by SLAAC for management of the unit using the Subnet Prefix and the interfaces MAC address. This is a unique address that identifies the interface/device in the IP network. |
Subnet Preflix Length | (Static Addressing only) The Prefix Length in IPv6 is the equivalent of the Subnet Mask in IPv4. However, instead of being expressed in four octets as it is in IPv4, it is expressed as an integer between 1 through 128. |
Gateway | If Automatic addressing is used, displays the gateway address of the network (typically the address of the network router). If Static addressing is used, enter a gateway address in hexadecimal notation. |
Privacy Extensions | (Automatic Addressing only) Check this checkbox to enable SLAAC Privacy Extensions. As documented in RFC 4941 "Privacy Extensions for Stateless Address Autoconfiguration in IPv6", this entails using randomly generated, temporary, global scope IPv6 addresses that are regularly discarded and replaced with different addresses. |
Duplicate Address Detection | Check this checkbox to automatically detect if your Link-Local IPv6 address is a duplicate of one already in use. If so, the Link-Local IPv6 Address changes to a unique address. See RFC 4862 "IPv6 Stateless Address Autoconfiguration" for more details. |
Link-Local IPv6 Address | (Read-only) A link-local address is an Internet Protocol (IP) unicast address intended to be used only to connect to the hosts on the same network. A link-local address starts with fe80: and is always automatically assigned. |
Accept Redirect Messages | (Disabled by default) Check this checkbox to accept ICMP redirect messages from remote routers. This enables Kraken to use a more direct route for a particular location. Note Because these remote unauthenticated messages modify Kraken’s route table, this capability should only be enabled within trusted environments. |
For further IPv6 support details, see IPv4 and IPv6 Support.
Static Routes
Network Setting | Description/Values |
---|---|
Destination | Each static route requires a destination. |
Subnet Mask/Prefix Length |
This is a 24-bit subnet mask used to divide an IP address into subnets and specify the network's available hosts. Note If DHCP is disabled, you may enter the Network Mask in dotted-decimal format (e.g., 255.255.255.0). |
Gateway | This is the gateway that is used when no other gateway matches. This address must be reachable on your local subnet. If DHCP is disabled, you may enter the gateway address in dotted-decimal format. |
Interface | The interface associated with the static route. Use the drop-down menu to make your selection. |