Version History

Added the ability to configure Makito audio and video encoder cores using a new Templates & Profiles screen.

Note

The ability to save the current encoder configuration will be available in a future Hub 360 release.

• Templates & Profiles Screen

• Adding a Makito Profile

• Editing, Copying, and Deleting a Profile

• Applying a Profile to a Makito Encoder

Clicking the

• Routes Pane

• Viewing Destination Status

Added support for the upcoming Falkon X2 5G mobile video transmitter.

• Supported Appliances and Versions

Added support for paired transmitters and StreamHubs in data bridge mode. On the Master Control screen a

Note

Configuring and enabling data bridge mode must be completed within the transmitter interface.

• Using Data Bridge Connections in Hub 360

• Creating a Route

• Sources Pane

• Routes Pane

For StreamHubs (cloud and on-premise), you can now configure the number of inputs you wish to reserve for lives and file forwards. By default, all inputs could be used either for live or file forward.

• Reserving StreamHub Inputs for Live or File Forward Bookings

For Makito Decoders, added ability to specify a streaming address and port per video decoder core.

• Editing Appliance Settings

In the Master Control screen:

• Improved the telemetry reporting from field unit sources to include status information for each field unit's network connection, including individual network bitrates.

• Added bitrate reporting when using the latest version of MoJoPro.

• Viewing Source Status

Support for SSO with identity providers compatible with SAML 2.0 has been added. Please contact your Haivision sales representative to activate and set up this feature.

N/A

When Geolocation is enabled, the Appliances screen reports the last known location for offline transmitter and MojoPro devices. When administrators disable geolocation for their organization, all last known location information is deleted.

• Viewing Appliance Details

• Editing Organization Settings

Added editable description field for StreamHub appliances.

• Editing Appliance Settings

For your connected Makito Decoders you can now view and control the configured video decoders and streams on the Appliances screen.

• Starting and Stopping Makito Encoder/Decoder Streams and Cores

Added input/output network bandwidth in the SRT Gateway listing in the Appliances screen.

• Viewing and Editing Appliance Details

Successful appliance reboot messages can now be dismissed in the Appliances screen.

N/A

Added ability to customize the brightness and contrast of the web interface.

Note

The brightness and contrast settings are stored in your browser and do not persist across other browsers nor devices.

• Updating Your Profile

Updated steps involved with accepting an invitation for new users.

• Accepting an Invitation

The current status of StreamHubs and Cloud StreamHubs in the Appliances screen is still reflected when Master Control is disabled on these devices.

• Enabling/Disabling Master Control

A new screen has been added to give you an overview of all routes and bookings created in Hub 360.

• Workflows Screen

• Viewing Your Workflows

• Activity Feed Entries

For your connected Makito Encoders you can now view and control the configured streams, video encoders, and audio encoders on the Appliances screen.

• Starting and Stopping Makito Encoder Streams and Encoders

Added display of GPS coordinates on the Appliances screen for paired Air, Pro, and MoJoPro devices. Administrators can enable/disable this setting across all appliances, or you may enable/disable the individual appliance's location in the settings on the Appliances screen.

• Editing Organization Settings

• Viewing Appliance Details

• Editing Appliance Settings

SRT Gateway devices can now be paired to Hub 360. However, only limited functions are available. Full support for SRT Gateway will be available in a future release.

• Supported Appliances and Versions

• Appliance Network Requirements for Use in Hub 360

• Adding an Appliance

• Editing Appliance Settings

• Viewing and Editing Appliance Details

If your device is not yet supported in Hub 360, you may add an external source or destination and populate pre-existing SRT streams within these devices. You can then use these streams in the Master Control screen to create routes. See the following note for limitations.

Note

• Currently, only SRT streams in listener mode are supported.

• In the Master Control screen, externalsource streams can only be routed to Makito decoders and Cloud StreamHubs.

• In the Master Control screen, only Makito encoder sources can be routed to external destination streams.

• External sources and destinations do not count against your license's appliance usage.

• Adding an Appliance

• Viewing and Editing Appliance Details

• Viewing Appliance Details

• Adding and Editing Streams on External Appliances

• Viewing Source Status

• Viewing Destination Status

Added ability to prioritize StreamHubs within groups for auto-generated routes from transmitters or MoJoPro devices.

• Managing the Priority of StreamHubs within a Group

• Understanding StreamHub Usage with Automated Routes

With the release of Makito FX Encoder 1.1, these encoders are now fully integrated with Hub 360. You can create and edit streams using them in the Master Control screen, and you may initiate an SSH tunnel to interact directly with the encoder's interface.

• Supported Appliances and Versions

In the StreamHub appliance settings, added an Interface Address textbox, allowing you to specify a custom address or domain name for appliance interface access. This address or domain is used when accessing the appliance interface via Hub 360.

• Editing Appliance Settings

You can now configure a streaming IP address or domain for your paired Makito Decoders. If configured, this address will be used to connect to the decoder for video transmissions.

• Editing Appliance Settings

Whether you rename your Makito devices in the Hub 360 interface or in the individual Makito web interfaces, both will now stay in sync.

N/A

A MoJoPro license allows you to stream from the app to any paired StreamHub. With StreamHub 4.5+, you can use MoJoPro licenses already present on paired StreamHubs.

Contact your Sales representative to purchase these licenses.

• Admin Area Screen

• Reviewing MoJoPro Licenses

You can now manually configure a streaming IP address or domain for your paired StreamHubs. If configured, this address will be used to connect to the StreamHub for video transmissions.

• Viewing and Editing Appliance Details

• Viewing Appliance Details

• Editing Appliance Settings

Added new message types to the Admin Area's Activity Feed.

• Activity Feed Entries

Non-administrator accounts now have access to the Admin Area's Activity Feed screen to view limited messages.

• Viewing Activity Feed

Added search option for the Activity Feed. You may search for device name, group name, or pairing code name.

• Admin Area Screen

• Viewing Activity Feed

In the Master Control screen, if a StreamHub route has yet to be configured, after selecting a route's source, a new configuration modal appears to configure the route's outputs.

• Creating a Route

In the Master Control screen, the StreamHub route tiles now indicate the output number and protocol used.

• Routes Pane

You can now create/edit routes in MCR when your transmitters (Air, Pro, and Rack) are offline.

• N/A

Support for automatic refresh of appliance names when their names are changed in the individual appliance's UI.

• N/A

The Master Control section now fully supports the Makito X4 Decoder as a receiver. You can easily create SRT routes to this appliance and monitor the associated telemetry.

• Supported Appliances and Versions

• Viewing Destination Status

• Routes Pane

• Create a Makito Encoder to Decoder SRT Connection

Added search functionality in the Master Control screen.

• Sources Pane

• Routes Pane

Added Activity Feed tab in the Admin section, so that you can now display the history of completed actions or events. In the future, this feature will log more event types.

• Admin Area Screen

• Viewing Activity Feed

• Activity Feed Entries

Added a What's New dialog that provides a summary of the main improvements and features as each new version is released.

• What's New Dialog

Added documentation for network requirements before connecting your appliances to Hub 360.

• Appliance Network Requirements for Use in Hub 360

Added ability to upgrade the firmware of your Makito or transmitter (Air, Pro, Rack) appliances.

• Upgrading an Appliance

Added ability to filter the items in the Master Control and Appliances screens by Group.

• Master Control Screen

• Sources Pane

• Routes Pane

• Appliances Screen

Added ability to search the Appliances list by various appliance information, not just the appliance name.

• Appliances Screen

Added Master Control support for the Makito X1 Encoder.

• Supported Appliances and Versions