Skip to main content

Routes Pane

The Routes pane of the Master Control screen displays the available receivers and associated route tiles.

The 

Status Filter icon
Status Filter button allows you to make the number of tiles more manageable by changing the selections on the dropdown menu to display only the selected route status.

Status Filter

The 

Groups Filter icon
Groups Filter buttons allow you to make the number of tiles more manageable by changing the selections on the dropdown menu to display only the selected route status or groups.

Groups filter

The Receivers Dropdown allows you to select which receivers are shown in the routes pane. The number identifies how many receivers that are currently displayed. For example, "1/4 Receivers" indicates one of the four connected receivers is displayed.

You can also use the 

Search Textbox to find the receivers you desire. Type a string in the text box and press the Enter key. For each additional string you enter an AND operation is performed by the search.

The Receiver Toolbar is the left vertical bar and its associated route tiles appear to the right.

  • The receiver toolbar provides the receiver name and quick stats on 
    processor, 
    memory, and 
    disk usage.
  • Clicking the
    Remote control icon
    icon opens another browser tab to directly access the receiver's web interface.
  • Clicking the
    Appliances icon
    icon takes you to the receiver on the Appliances page.

Route Tiles are assigned to the inputs of the receivers. The Route tiles consist of a thumbnail preview (if Live) and a variety of controls and status information. See the following section for more details.


Route Tiles

There are small differences in the route tile between the StreamHub and Makito decoder devices. See the information in the following tabs for samples of each device. See Using Master Control for more details.

StreamHub

Makito Decoder

Route StatusColored bar indicates the current status of the route. If the route is currently Live, a Live status box appears under the bar.
Source Icon and Name

Shows the type of source, the input number (Makito only), and the source name. When route is disabled, clicking the source names opens a dropdown to select the route source.

Sources dropdown

Route Name


Talkback Enable button (StreamHub only)Enables or disables talkback for the route, if applicable.
Start/Stop Record button (StreamHub only)Click the 
Not recording
button to start recording the source. Click the 
Recording
button to stop the record.
Route Enable button

Click the 

Enable
button to disable the route. Click the
Disabled
button to enable the route.

Expand Route Details button

The function on this button differs depending on if the receiver is a StreamHub or Makito Decoder.

StreamHub

For StreamHub devices, clicking the

Expand
Expand button on the desired tile opens the route/nodes map.

  • Use the display controls to + zoom in, zoom out, and 
    Center icon
    center on the map.
  • Click 
    Edit icon
     Edit to edit the route (see Editing a Route) or
    Collapse icon
     Collapse to return to the tile view.

Expanded Route

Makito Decoder
For Makito Decoder devices, clicking the 
Expand button on the desired tile opens the route information and telemetry view. See Viewing Destination Status for more details.

More Options

Click the 

More options
button to show more options for the route, allowing you to rename and edit the selected route.

Assigned SDI output (Makito Decoder only)Indicates which SDI output is in use by the route.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.