Appliance Network Requirements for Use in Hub 360
To connect your appliances to your Hub 360 organization, the appliances and their versions must support connection to Hub 360 (see Supported Appliances and Versions) and your appliances must meet the following network requirements.
Note
Additional network requirements apply to your appliance for other features. This table only lists specific requirements for use in Hub 360. Please see the Haivision Security Guide available on the Support Portal.
| Appliance Type | Application | Protocol | Direction | Port | Notes |
|---|---|---|---|---|---|
| Makito Encoder/Decoder | MQTT broker for pairing with Haivision Hub 360 | TCP | Outgoing | 8883 | Access to the following URL: mqtt-cp-prod-rosetta.eastus.cloudapp.azure.com |
| Makito Encoder/Decoder | SSH tunnel connection | TCP | Incoming | 5022 | Access to IPs 172.212.112.198 and 172.212.112.199 |
| Makito Encoder | SRT connections to StreamHub destinations when using Hub 360 | UDP | Outgoing | 9000-90xx | The port number increments for each SRT stream starting at 9000 |
| Air, Pro, Rack, MoJoPro | Pairing with Haivision Hub 360 to acquire SST endpoint | TCP | Outgoing | 443 | Access to the following URL: grpc.orion.hub360.haivision.com |
| Air, Pro, Rack, MoJoPro | Connection between video transmitter and Haivision Hub 360 through SST endpoint | UDP | Outgoing | Configured by Hub 360 | Access to the following URL: *.compute.hub360.haivision.com |
| Air, Pro, Rack, MoJoPro | Connection to StreamHub | UDP | Outgoing | 7900+ | Base port 7900 used for pairing (Default, configurable) |
| StreamHub and Cloud StreamHub | Pairing with Haivision Hub 360 | TCP | Outgoing | 443 | Access to the following URL: grpc.orion.hub360.haivision.com |
| StreamHub and Cloud StreamHub | SRT connections from Makito Encoders sources | UDP | Incoming | 9000-90xx | The port number increments for each SRT stream starting at 9000 |
1. 1 to 16 corresponding to the input number used in the StreamHub. For example, if the transmitter connects to input 5 and the base port is 7900, the port 7905 shall be open.