Skip to main content

MB6 Installation

The MB6 may be installed in one of two ways: (1) free-standing on a desktop or rack shelf, or (2) fastened directly to a rack using support brackets (supplied).


To prevent electric shock, do not remove the cover of the MB6 chassis. There are no user-serviceable parts inside. The MB6 chassis is to be installed and serviced by qualified personnel only.

To install the MB6:

  1. Unpack the box and visually inspect the package contents for any evidence of shipping damage. See the Important Notice document in the box for a list of contents.
  2. For desktop installation, place the MB6 chassis on a solid surface.
  3. For rack installation, position the MB6 chassis in a rack, using the 4 screws supplied to secure it in place.


    For 4-post racks, use the brackets supplied to secure the rear of the chassis.

  4. Insert the cards from the front.

Related Topics

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.