Skip to main content

Technical Specifications


CineLink 4K-EL-4


CineLink 4K-EL-2


Video Encoding

Maximum Simultaneous Encodes

Up to 2 x (4096x2160) @60HZ 4:2:0

Up to 2 x (4096x2160) @60Hz 4:2:0

Up to 2 x (3840x2160) @ 60Hz 4:4:4

Up to 2 x (3840x2160) @60Hz 4:2:0

Up to 3 x (1920x1200) @ 60Hz 4:4:4

Up to 2 x (1920x1200) @60Hz 4:4:4

Up to 3 x (1920x1080) @ 60Hz 4:4:4

Up to 2 x (1920x1080) @60Hz 4:4:4

Up to 4 x (4096x2160) @30Hz 4:2:0

Up to 2 x (4096x2160) @30Hz 4.4.4

Up to 4 x (3840x2160) @30Hz 4:2:0

Up to 2 x (3840x2160) @30Hz 4.4.4

Up to 4 x (1920x1080) @60Hz 4:2:0

Up to 2 x (1920x1080) @60Hz 4.4.4

Compression Standard

H.264

Bit Rate Range

50 Kbps to 120 Mbps; 15 Mbps (default)

Rate Control

Constant Bit Rate (CBR), Variable Bit Rate (VBR), Favor Quality, Adjustable GOP Size

Audio Encoding

Compression Standard

MPEG-4 AAC-LC/HEv1/HEv2

Audio Sample Frequency

32 kHz; 44.1 kHz; 48 kHz

Audio Bit Rates

Up to 576 Kbps (AAC-LC); Up to 288 Kbps (AACHEv1); Up to 144 Kbps (AAC-HEv2)

Video Inputs

Maximum Input Resolution

Up to 2 x (4096x2160) @60Hz

Up to 2 x (4096x2160) @60Hz

Up to 2 x (3840x2160) @60Hz

Up to 2 x (3840x2160) @60Hz

Up to 4 x (4096x2160) @30Hz

Up to 2 x (4096x2160) @30Hz

Up to 4 x (3840x2160) @30Hz

Up to 2 x (3840x2160) @30Hz

Input Format

4 x HDMI 2.0 with Audio Support

2 x HDMI 2.0 with audio support

Audio Inputs

Input Format

4 x HDMI 2.0 digital LPCM two-channel stereo audio

2 x HDMI 2.0 digital LPCM two-channel stereo audio

4 x 3.5 mm analog stereo audio

2 x 3.5 mm analog stereo audio

1 x 3.5 mm stereo mic in

1 x 3.5 mm stereo mic in

Outputs/Loop-Out

Output/Loop-Out

4 x HDMI 2.0 with audio support

2 x HDMI 2.0 with audio support

Networking Connectivity

Network Connector

2 x RJ45

Network Standard

100/1,000 base-T Ethernet; auto speed; half / full duplex; unicast, multi-unicast, multi-cast

IP Addressing

IPv4 and IPv6 support; DHCP and static IP addressing

Color Space

Color Space Capture

RGB and YUV 8-bit and 10-bit support

Chroma Sub-Sampling

4:4:4 (8-bit); 4:2:2 (8-bit); 4:2:0 (8-bit and 10-bit); 4:0:0 (8-bit and 10-bit)

Power

Power Supply

100–240V AC (60W)

Redundant Power Supply Unit Options

Single density unit can power up to four devices simultaneously.
Dual density unit can power up to eight devices simultaneously.

Power Consumption

S-C360-CL-4KEL2: 5 amps at @ 12V DC

S-C360-CL-4KEL4: 5.5 amps at @ 12V DC

Operating Temperature0 to 40 °C


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.