Skip to main content

Physical Installation

Note

It is strongly recommended professional setup unique to each customer be performed by a Haivision agent. Contact Haivision for additional information.

Required Components

  • AC power cord
  • PC or laptop connection
  • Input cables

Optional Components

  • Auxiliary video display screen
  • Output cables

Procedure

To connect the CineLink 4K-EL-4/4K-EL-2:

  1. Open the box, verify the contents, and visually inspect the items for any shipping damage. If necessary, contact Haivision for return instructions.
  2. Unpack the box and position the hardware on a stable work surface. Optionally, mount the device in a server rack.

    Note

    The CineLink 4K-EL-4 and 4K-EL-2 encoders are indoor appliances and should be kept in a dry, dust free environment. 

    Caution

    When mounting in a server rack, refer to your rack vendor's documentation as well as the included rack mount instructions in the rail kit provided with your system. Improper rack mounting could cause serious harm to equipment and/or people near the rack. Please be sure to properly and securely mount your hardware.

    Ensure that the final location has proper airflow. Do not block or impede airflow to the vents.

    ATTENTION: Lors du montage dans un rack de serveurs, reportez-vous à la documentation du fournisseur de votre rack ainsi qu'aux instructions de montage dans un rack incluses dans le kit de rails fourni avec votre système. Un montage incorrect en rack peut causer de graves dommages à l'équipement et/ou aux personnes à proximité . Assurez-vous de monter correctement et en toute sécurité votre matériel.

    Assurez-vous que l’emplacement final dispose d’une bonne circulation d’air. Ne bloquez pas et n’empêchez pas le flux d’air vers les bouches d’aération. 

  3. On the device:
    • Connect source(s) to the "HDMI IN" ports on the unit.
    • Connect a network cable to AVIP 1.
    • (Optional) Connect a display to the "HDMI OUT" ports.
    • Connect the AC power cord to the unit.

Once the CineLink is powered on, the power LED on the front of the unit illuminates. Command 360 software will auto-discover the CineLink.

Setup of the CineLink 4K-EL-4/4K-EL-2 is now complete.


JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.