Enabling/Disabling the Wi-Fi Interface

Note

By default, the Wi-Fi network is disabled.

See the sections below to configure the Wi-Fi Interface.

Unit Panel

1. Use the wheel to select > WiFi > State.

2. Click the wheel to enable the Wi-Fi network.
   The toggle switch to on and the Mode field appears.

Web Interface

On the Dashboard, in the Networks section, click the toggle button to enable or disable the Wi-Fi connection.

Wi-Fi disabled:

Wi-Fi enabled:

Note

• If you disable Wi-Fi you may lose the web interface connection.

• If the Wi-Fi interface does not appear, ensure the All filter is selected: