Configuring Live Profiles

A Live Profile is a set of audio and video settings configured to fit within specific broadcasting requirements. Live Profiles can be configured from either the Web Interface or on the Unit Front Panel.

The unit is delivered with three (3) default Live Profiles:

DEFAULT
LOW DELAY
HQUALITY 10s

Recommendations when configuring a Live Profile:

End-to-End Latency (by Application type)	Broadcast over SST mode	For CBR, enter a value within the 500ms - 10s range. For VBR, enter a value within the 800ms - 10s range.
	Broadcast over SRT mode
	Video Return
Bitrate Control Mode	CBR mode for streaming over managed networks. VBR mode for streaming over unmanaged networks.
Resolution	As source for an encoding in the same resolution as source. Dynamic when the resolution is adapted to available bitrate (H.264 only).
Live Bitrate (static resolution as source)	Video Resolution	Bitrate Range
	Video Resolution	H.265/HEVC	H.264/AVC
	1080p 50/59.94/60	600 kbps - 20 Mbps	3 - 20 Mbps
	1080p 25/29.97/30	600 kbps - 20 Mbps	1.8 - 20 Mbps
	1080i 50/59.94/60	300 kbps - 20 Mbps	1.8 - 20 Mbps
	720p 50/59.94/60	300 kbps - 20 Mbps	1.4 - 20 Mbps
	SD (PAL or NTSC)	200 kbps - 20 Mbps	0.5 - 20 Mbps
Live Bitrate (dynamic resolution)	1080p 50/59.94/60	-	200 kbps - 20 Mbps
	1080p 25/29.97/30
	1080i 50/59.94/60
	720p 50/59.94/60
	SD (PAL or NTSC)
Manual Resolution	1080p 50/59.94/60	-	3 - 20 Mbps
	1080p 25/29.97/30		1.8 - 20 Mbps
	720p		1.4 - 20 Mbps
	854 x 480p		0.5 - 20 Mbps
	640 x 360p		0.4 - 20 Mbps
	426 x 240p		0.3 - 20 Mbps
Audio Settings	Channel Layout	Bitrate Range
	1 x Mono	32 - 256 kbps
	1 x Stereo	64 - 512 kbps
	2 x Mono	64 - 512 kbps

The following Transport Stream settings are available if the Application type is set to Broadcast (SRT):

Bitrate Control	VBR CBR
TS ID	1 - 1023
Program Number	1 - 1023
PMT PID	32 - 8191
PCR PID	32 - 8191
Video PID	32 - 8191
Audio PID	32 - 8191