Configuring the Time and Date

To configure the time and date from the Unit Panel or from the Web Interface, see the sections below.

Unit Panel

1. From the Home menu, use the wheel to select  > > General > Date.

2. (Optional) Enable the Use NTP toggle and enter an NTP Server address in the field below.

3. Use the wheel to set the date and time and press to confirm.

Web Interface

Set Date & Time manually

1. In the sidebar, click Settings > System.

2. Ensure the User NTP toggle is disabled.

   

3. Click within the Manually Set Date & Time field.
   A calendar and clock dialog appears for you to select the date and time:

   

4. Click Apply in the dialog.

5. Click the Apply button.

Set Date & Time via NTP Server

1. In the sidebar, click Settings > System.

2. Click the Use NTP toggle button to enable NTP server.

3. Enter a valid NTP Server address in the available field.

4. Select the desired Time Zone from the dropdown list.

5. Click the Apply button.