Starting / Stopping a Live (MultiMode)

You can start a live manually via the unit panel, web interface, or camera or you can enable the Auto-live at startup. See Enabling / Disabling Auto-Live at Startup.

Unit Panel

To start a live:

1. From the Home menu, tap

   

   . The video preview appears on screen and the live profile selected is displayed. When tapping

   

   or

   

   , the Live menu displays additional information for each encoder.
   
   

   

   Enable Encoder
   

   

   Selected Source
   

   

   Selected Live Profile
   

   

   Selected Destination Profile
   

   Note

   • Video source must be all SDI or all Pattern.
   • All inputs must have the same resolution and the same frame rate.

   You can modify settings before starting the Live action:

   • To select another Source:
     1. Tap the

        

        field.
     2. Tap another source.
   • To select another Live profile:
     
     1. Tap the

        

         field.
     2. Tap another Live profile.
   • To select another Destination profile:
     
     1. Tap the

        

        field.
     2. Tap another Destination profile.
2. Tap

   

   to start the Live for all encoders. Video previews appear on screen.
   
   

   

   Audio bars indicating audio levels
   

   

   Live icon blinking means that a live is running
3. Tap an encoder to display more information.
   
   

   

   Audio bars indicating audio levels
   

   

   Live duration

4. Tap

   

   to display some indications about the Live action: 
   
   

   

   End-to-end Latency configured in the Live Profile or modified remotely from StreamHub interface
   

   

   Network bitrate
   

   

   Source standard
   

   

   Live duration
   

   Note

   See the StreamHub User Guide to set another delay during Live operation.

To stop the Live for all encoders:

1. Tap

   

   .
2. Tap

   

   .
3. Tap

   

   to confirm.

To stop the Live for a single encoder:

1. Tap the preview of the encoder that you want to stop.
2. Tap

   

   .
3. Tap

   

   .
4. Tap

   

   to confirm.

Web Interface

To start a live:

1. Click

   

   .
2. For each encoder, check that the settings are configured and selected as required:
   • Video Source
   • Live Profile

   • Destination Profile
     

     

     
     
     
     

     Note

     1. Video Source must be all SDI or all Pattern.
     2. All inputs must have the same resolution and the same frame rate.
3. Click

   

   to start the Live for all encoders.

To stop the Live:

1. Click

   

   . A

   

   popup appears.
2. Click

   

   or the

   

   icon to stop the video transmission.

Camera

Note

Before starting a live, make sure that the REC button, the Live profile, and the Destination profile have been configured. Please see Configuring the Camera's REC Button and Configuring Live Profiles.

To start a live:

• Press the camera's REC button.

The Live is in progress.