Skip to main content

Selecting Automatic Mode


Automatic Mode is the default setting.

To select automatic mode from the Unit Panel, or from the Web Interface, see the sections below.

Unit Panel

  1. From the Home menu, click
  2. Click
    to scroll down to the modem to be configured.
  3. Click the modem line to enter the MOD. CONFIG menu.
  4. Click
  5. Click the Operator field.
  6. Click
    to enable Automatic Mode.

Web Interface

  1. From the Home screen, click on a modem line.
  2. In the Selection mode scrolling list, select Auto.
  3. Click on Apply.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.