Skip to main content

Starting a Live

You can start a live manually or you can enable the Auto-live at startup. See Enabling / Disabling Auto-Live at Startup.

Unit Panel

To start the Live:

  1. From the Home menu, click on

    . The video preview appears on screen and the live profile selected is reminded. When clicking on
    or
    , the Live menu provides some additional information.


    Selected Live Profile
    Selected Record Profile
    Auto-record is enabled or not (OFF/ON)
    The Selected Destination Profile

    You can modify these settings before starting the Live action.

    • To select another Live profile:

      1. Click on the
        field.
      2. Click on another Live profile.
    • To select another Record profile:
      1. Click on the
        field.
      2. Click on another Record profile.
    • To modify the Auto-Record mode:

      1. Click on the

        or
        button option to toggle the setting.

      Note

      Simultaneous Live and Record in H.264 1080p50/59.94/60 is not supported.

    • To select another Destination profile:

      1. Click on the
        field.
      2. Click on a different Destination profile.
  2. Click on
     to start the Live. The video preview appears on screen.

    Audio Bars indicating Audio Levels
    Live Duration

  3. Click on

    to display information about the Live action.


    Network Bitrate
    Source Standard
    Live Duration
    End-to-End Latency configured in the Live Profile or modified remotely from StreamHub interface.

    Note

    Refer to the StreamHub User Guide to set another delay during Live operation.

    In case of a live and simultaneous Record, a different screen appears:

    Source Standard
    Record Duration
    Remaining recording time possible on SD card.
    Space used on SD card.

To stop the Live:

  1. Click on
    .
  2. Click on
  3. Click on
    to confirm.

To stop the Record:

  1. Click on
    .
  2. Click on
    .
  3. Click on
    to confirm.

Web Interface

To start the Live:

  1. Click
    to check that the unit settings are configured and selected as required:
    • Live profile
    • Auto-record mode (OFF / ON)
    • Record profile
    • Auto-forward option (OFF / ON)
    • Destination profile

      Note

      If you enable the Auto-record option, the video file is automatically recorded during the live.
  2. Click
    to start the Live.

To stop the Live:

  1. Click
    . A
    popup appears.
  2. Click
    or the
    icon to stop the video transmission.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.