Starting a Live

You can start a live manually or you can enable the Auto-live at startup. See Enabling / Disabling Auto-Live at Startup.

Unit Panel

To start the Live:

1. From the Home menu, click on

   

   . The video preview appears on screen and the live profile selected is reminded. When clicking on

   

   or

   

   , the Live menu provides some additional information.
   
   

   

   Selected Live Profile
   

   

   Selected Record Profile
   

   

   Auto-record is enabled or not (OFF/ON)
   

   

   The Selected Destination Profile

   You can modify these settings before starting the Live action.

   • To select another Live profile:

     1. Click on the

        

        field.
     2. Click on another Live profile.
   • To select another Record profile:
     1. Click on the

        

        field.
     2. Click on another Record profile.

   • To modify the Auto-Record mode:

     1. Click on the

        

        or

        

        button option to toggle the setting.

     

     Note

     Simultaneous Live and Record in H.264 1080p50/59.94/60 is not supported.

   • To select another Destination profile:

     1. Click on the

        

        field.
     2. Click on a different Destination profile.
2. Click on

   

    to start the Live. The video preview appears on screen.
   
   

   

   Audio Bars indicating Audio Levels
   

   

   Live Duration
   
   

3. Click on

   

   to display information about the Live action.

   
   

   

   Network Bitrate
   

   

   Source Standard
   

   

   Live Duration
   

   

   End-to-End Latency configured in the Live Profile or modified remotely from StreamHub interface.
   

   Note

   Refer to the StreamHub User Guide to set another delay during Live operation.

   In case of a live and simultaneous Record, a different screen appears:

   

   

   Source Standard
   

   

   Record Duration
   

   

   Remaining recording time possible on SD card.
   

   

   Space used on SD card.

To stop the Live:

1. Click on

   

   .
2. Click on

   

   . 
3. Click on

   

   to confirm.

To stop the Record:

1. Click on

   

   .
2. Click on

   

   .
3. Click on

   

   to confirm.

Web Interface

To start the Live:

1. Click

   

   to check that the unit settings are configured and selected as required:
   • Live profile
   • Auto-record mode (OFF / ON)
   • Record profile
   • Auto-forward option (OFF / ON)

   • Destination profile

     

     Note

     If you enable the Auto-record option, the video file is automatically recorded during the live.
2. Click

   

   to start the Live.

To stop the Live:

1. Click

   

   . A

   

   popup appears.
2. Click

   

   or the

   

   icon to stop the video transmission.